My laptop is an Asus Q550LF; and all the F keys do something when I hold down fn and press them except for f5 and f6 which controls the screen brightness. I've always had this problem with ubuntu, but have just now got around to look for a fix. Does anyone have one?
↧
[ubuntu] How to use the screen brightness fn key on ubuntu 15.10
↧
MSI Ghost Pro GS60 w/ Skylake -- won't boot Ubuntu 15.10
Hi,
I just acquired a new MSI Ghost Pro GS60 (with Skylake, an SSD drive, and a PCIe drive) from XoticPC. I cannot get it to boot Ubuntu. I have tried mostly with the 15.10 distro. I've tried various BIOS settings and boot flags, especially those I found in various postings from people who've described how to install recent Ubuntu distros on recent MSI laptops. But none worked. If anyone has been able to run/install Ubuntu on this particular machine, I'd very much appreciate it if you'd tell me how you did it. Otherwise the machine will have to be returned.
Thank you,
Matthew Fleming
I just acquired a new MSI Ghost Pro GS60 (with Skylake, an SSD drive, and a PCIe drive) from XoticPC. I cannot get it to boot Ubuntu. I have tried mostly with the 15.10 distro. I've tried various BIOS settings and boot flags, especially those I found in various postings from people who've described how to install recent Ubuntu distros on recent MSI laptops. But none worked. If anyone has been able to run/install Ubuntu on this particular machine, I'd very much appreciate it if you'd tell me how you did it. Otherwise the machine will have to be returned.
Thank you,
Matthew Fleming
↧
↧
prpoblem driver AMD propietary installation
Hello my problem is I have AMD R9 280 and I try install drivers AMD on Kubuntu 15.10 but I don't run driver because prerequisites, linux-headers-4.12.16-genenic the number is don't remember exactly, but I try reinstalling linux-headers but don't run install driver the driver is
http://support.amd.com/es-xl/download/desktop?os=Linux+x86
could you tell me? what do I do run the driver installation please.
http://support.amd.com/es-xl/download/desktop?os=Linux+x86
could you tell me? what do I do run the driver installation please.
↧
[SOLVED] Brother MFC-J6910DW not connecting any more
Hi
I installed Ubuntu a couple of weeks ago after having used Windows for about 1 year or 2. I tried to install my printer with the driver install tool (witch is new from last time I used Ubuntu) First it worked without any issues. But now something has happened and it won't connect any more. I don't know what I have been doing wrong, and I honestly don't know where to begin. I've reinstalled the printer, but with no luck. It still won't work. Last time I had issues with the firewall. But I opened the necessary ports. And even when I turn of the firewall it still won't connect.
I installed Ubuntu a couple of weeks ago after having used Windows for about 1 year or 2. I tried to install my printer with the driver install tool (witch is new from last time I used Ubuntu) First it worked without any issues. But now something has happened and it won't connect any more. I don't know what I have been doing wrong, and I honestly don't know where to begin. I've reinstalled the printer, but with no luck. It still won't work. Last time I had issues with the firewall. But I opened the necessary ports. And even when I turn of the firewall it still won't connect.
↧
Question about Wacom tablet support.
Hi there,
I've recently bought a Wacom INTUOS Draw tablet, and when I plugged in, it wasn't working. I understood that since the tabled was released in 2015 and I was using Ubuntu 14.04. I read the Linuxwacom site, but I would prefer not messing with that if not necessary.
My question is, is there a chance that my tablet will be supported in future Ubuntu releases, so should waiting for another release be enough or do I have to install these drivers manually anways? If it will be supported, will it be shown in changelogs specifically? Or 15.04 and 15.10 versions already support it?
Thanks in advance.
I've recently bought a Wacom INTUOS Draw tablet, and when I plugged in, it wasn't working. I understood that since the tabled was released in 2015 and I was using Ubuntu 14.04. I read the Linuxwacom site, but I would prefer not messing with that if not necessary.
My question is, is there a chance that my tablet will be supported in future Ubuntu releases, so should waiting for another release be enough or do I have to install these drivers manually anways? If it will be supported, will it be shown in changelogs specifically? Or 15.04 and 15.10 versions already support it?
Thanks in advance.
↧
↧
Sound stops working randomly under GNU/Linux
Hello,
I have this very annoying problem:
Laptop i3 4 GB RAM Lenovo, about 2 years old.
Under Windows 7 and 10 sound works well.
Under GNU/Linux sound stops working randomly, after 30 seconds or after 1 hour. The microphone continues to run, but I cannot hear sounds anymore.
Also, I tried "speaker-test" - it does not write errors, seems to work, just sound is not audible.
I tried installing fresh openSuse 41.2 Leap, Tumbleweed, with Xfce and KDE, Xubuntu, Linux Mint Cinnamon, with/without updates. The same behavior.
Until 10 days ago it worked correctly.
I am getting desperate. I searched the internet and tried all possible workouts from the forums.
I attach the sudo alsa-info.sh from my computer, when sound is not working (after it worked for about 1 hour).
http://www.alsa-project.org/db/?f=56...2a2d7fa6f1fc3c
I have this very annoying problem:
Laptop i3 4 GB RAM Lenovo, about 2 years old.
Under Windows 7 and 10 sound works well.
Under GNU/Linux sound stops working randomly, after 30 seconds or after 1 hour. The microphone continues to run, but I cannot hear sounds anymore.
Also, I tried "speaker-test" - it does not write errors, seems to work, just sound is not audible.
I tried installing fresh openSuse 41.2 Leap, Tumbleweed, with Xfce and KDE, Xubuntu, Linux Mint Cinnamon, with/without updates. The same behavior.
Until 10 days ago it worked correctly.
I am getting desperate. I searched the internet and tried all possible workouts from the forums.
I attach the sudo alsa-info.sh from my computer, when sound is not working (after it worked for about 1 hour).
http://www.alsa-project.org/db/?f=56...2a2d7fa6f1fc3c
↧
[ubuntu] Install and get working hp g3010 scanjet on dell xps 18 dual boot 64bit
The scanner I have is an older model but it still works on Windows. However, trying to get it installed and working on Ubuntu 15.10 has been an adventure. This scanner is the last one listed on this page: https://wiki.ubuntu.com/HardwareSupp...entsScannersHp. I downloaded the hp3900 file, extracted it with the archive, and gave the sudo command as instructed. But then I got this error:
So then I went to the Ubuntu Software Center and downloaded and installed rapidsvn. When that opened, I immediately got the error that there was
' an invalid value 55 for a boolean key "/preferences/UseLastCommitMessage" in config file
I'm guessing the program automatically opens to the last commit, but since I've never used it before, of course there is no 'last commit'
I have neither the desire nor the time to debug an svn client I only got because I thought I needed it to install the drivers I was trying to get for the scanjet. So, a simple question: How do I get my scanjet to work, or is that a lost cause?
Code:
hp3900-series 0.12 - UPDATER
Select project sources you wish to update:
1: hp3900-series backend
2: SANE project
3: Both projects
Update selection [3]: 1
- Action : Downloading hp3900-series backend sources via SVN ...
./UPDATE.sh: line 167: svn: command not found
- Error : Some error caused SVN command execution. Are you sure you've installed SVN client?' an invalid value 55 for a boolean key "/preferences/UseLastCommitMessage" in config file
I'm guessing the program automatically opens to the last commit, but since I've never used it before, of course there is no 'last commit'
I have neither the desire nor the time to debug an svn client I only got because I thought I needed it to install the drivers I was trying to get for the scanjet. So, a simple question: How do I get my scanjet to work, or is that a lost cause?
↧
[ubuntu] pcmcia issue; /sys/bus/pcmcia/drivers/???
I am trying to get a National Instruments GPIB PCMCIA-GPIB+ card going on a laptop under 14.04.
I have _almost_ everyting in place, but I believe I need an entry in
/sys/bus/pcmcia/drivers
of the form
... /ni_pci_cs/new_id
a file into which I will put the vendor ID of the card I am trying to use.
Right now, the only thing in
/sys/bus/pcmcia/drivers/
is a sub-directory (???) called
(null)
I am unable to create either the needed sub-directory (ni_pci_cs) nor the file new_id .
Even as root, I get a message that the file does not exist!!
Should I be able to, e.g., a mkdir ni_pci_cs
???
Any ideas would be much appreciated ...
Frustrated in NJ ...
I have _almost_ everyting in place, but I believe I need an entry in
/sys/bus/pcmcia/drivers
of the form
... /ni_pci_cs/new_id
a file into which I will put the vendor ID of the card I am trying to use.
Right now, the only thing in
/sys/bus/pcmcia/drivers/
is a sub-directory (???) called
(null)
I am unable to create either the needed sub-directory (ni_pci_cs) nor the file new_id .
Even as root, I get a message that the file does not exist!!
Should I be able to, e.g., a mkdir ni_pci_cs
???
Any ideas would be much appreciated ...
Frustrated in NJ ...
↧
[SOLVED] Fiio eo7k garbled audio
Hello, I just installed Ubuntu 15.10, and am trying to get my audio to output correctly through my Fiio amp/dac. Problem is, everything that outputs through it while it's plugged in through USB is completely garbled. This didn't happen under Windows, and if I try my HDMI audio from my video card to my monitor, it works fine, no garbled audio at all. So, I'm at a loss for what could be causing the audio to become garbled when outputting through the Fiio e07k.
↧
↧
[ubuntu] bluetooth poor signal strength on ubuntu 15.10
Hello,
Since I have upgraded my system from Ubuntu 14.04 to Ubuntu 15.10 I have issues with my bluetooth. I can connect to my wireless headphones only if they are very close (10 cm) to my laptop. As soon as I move them farther away the connection is interrupted and I get the following error messages in syslog:
Using blueman I can see that received signal strength is sub-optimal, but I have not idea how to fix this. With Ubuntu 14.04 and the same headphones I had excellent signal quality even at a distance of 5m from my laptop.
Screenshot from 2015-11-01 02-38-15.png
Since I have upgraded my system from Ubuntu 14.04 to Ubuntu 15.10 I have issues with my bluetooth. I can connect to my wireless headphones only if they are very close (10 cm) to my laptop. As soon as I move them farther away the connection is interrupted and I get the following error messages in syslog:
Code:
bluetoothd[699]: Abort: Connection timed out (110)
acpid: input device has been disconnected, fd 21
bluetoothd[699]: Unable to get Headset Voice gateway SDP record: Host is downScreenshot from 2015-11-01 02-38-15.png
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Thermal (rev 04)
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
09:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
0a:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255]
$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
$ hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 10:08:B1:2F:93:F4 ACL MTU: 820:8 SCO MTU: 255:16
UP RUNNING
RX bytes:85080 acl:73 sco:0 events:9855 errors:0
TX bytes:2386672 acl:5407 sco:0 commands:7061 errors:0
$ uname -r
4.2.0-16-generic↧
[ubuntu] How do I turn off the keyboard backlighting on Sager P170SM-A?
As the title pointed out I need help disabling this backlight within linux. As of right now I have to open windows then restart into Linux to fix it. Any help would be appreciated.
Thank you
Thank you
↧
Mounting of CD with AUDIO and DATA on it
Hi !
Following problem, I want to mount a CD, which has AUDIO and a DATA on it. For PC and MAC.
In the file manager, the AUDIO will mount (except that two entries are visible on the file manager),
but the mounting of the DATA part (one entry appear in file manager for this) throws following error:
Error mounting
Error mounting /dev/sr0 at /media/istvan/Schritte plus 1: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,io charset=utf8,umask=0077" "/dev/sr0" "/media/istvan/Schritte plus 1"' exited with non-zero exit status 32: mount: block device /dev/sr0 is write-protected, mounting read-onlymount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
this is what Ubuntu tries
-> how can i mount AUDIO and DATA at once ?
DMESG gives this
istvan@Asus:~$ dmesg | tail[ 241.475022] Sense Key : Illegal Request [current]
[ 241.475031] sr 4:0:0:0: [sr0]
[ 241.475040] Add. Sense: Illegal mode for this track
[ 241.475047] sr 4:0:0:0: [sr0] CDB:
[ 241.475050] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
[ 241.475072] end_request: I/O error, dev sr0, sector 0
[ 241.475079] Buffer I/O error on device sr0, logical block 0
[ 251.490344] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
[ 251.490364] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
[ 285.162939] perf samples too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
istvan@Asus:~$
VAR/LOG/SYSLOG has this
Nov 1 12:47:40 Asus kernel: [ 226.276190] usb 1-1: new high-speed USB device number 3 using ehci-pciNov 1 12:47:40 Asus kernel: [ 226.413192] usb 1-1: New USB device found, idVendor=0e8d, idProduct=1806
Nov 1 12:47:40 Asus kernel: [ 226.413209] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 1 12:47:40 Asus kernel: [ 226.413219] usb 1-1: Product: MT1806
Nov 1 12:47:40 Asus kernel: [ 226.413228] usb 1-1: Manufacturer: MediaTek Inc
Nov 1 12:47:40 Asus kernel: [ 226.413236] usb 1-1: SerialNumber: R8X76YAD700JTT
Nov 1 12:47:40 Asus mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
Nov 1 12:47:40 Asus mtp-probe: bus: 1, device: 3 was not an MTP device
Nov 1 12:47:40 Asus kernel: [ 226.469323] usb-storage 1-1:1.0: USB Mass Storage device detected
Nov 1 12:47:40 Asus kernel: [ 226.469634] scsi4 : usb-storage 1-1:1.0
Nov 1 12:47:40 Asus kernel: [ 226.469994] usbcore: registered new interface driver usb-storage
Nov 1 12:47:41 Asus kernel: [ 227.471237] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB TS01 PQ: 0 ANSI: 0
Nov 1 12:47:41 Asus kernel: [ 227.505200] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 1 12:47:41 Asus kernel: [ 227.505212] cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 1 12:47:41 Asus kernel: [ 227.505696] sr 4:0:0:0: Attached scsi CD-ROM sr0
Nov 1 12:47:41 Asus kernel: [ 227.506033] sr 4:0:0:0: Attached scsi generic sg1 type 5
Nov 1 12:47:55 Asus kernel: [ 241.470035] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470046] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.470053] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470058] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.470068] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470077] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.470084] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.470089] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.470111] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.470120] Buffer I/O error on device sr0, logical block 0
Nov 1 12:47:55 Asus kernel: [ 241.472629] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472639] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.472646] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472651] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.472660] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472669] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.472676] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.472681] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.472702] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.472712] Buffer I/O error on device sr0, logical block 0
Nov 1 12:47:55 Asus kernel: [ 241.475003] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475011] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.475018] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475022] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.475031] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475040] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.475047] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.475050] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.475072] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.475079] Buffer I/O error on device sr0, logical block 0
Nov 1 12:48:05 Asus kernel: [ 251.490344] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
Nov 1 12:48:05 Asus kernel: [ 251.490364] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
Nov 1 12:48:39 Asus kernel: [ 285.162939] perf samples too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Nov 1 12:50:23 Asus kernel: [ 389.462118] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
Nov 1 12:50:23 Asus kernel: [ 389.462130] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
in the folder SBIN, I have
mount.ntfs
mount-ntfs-3g
in menu DISKS, I have automatic MOUNT options enabled
it also says here "Content" = UDF not mounted
Following problem, I want to mount a CD, which has AUDIO and a DATA on it. For PC and MAC.
In the file manager, the AUDIO will mount (except that two entries are visible on the file manager),
but the mounting of the DATA part (one entry appear in file manager for this) throws following error:
Error mounting
Quote:
Error mounting /dev/sr0 at /media/istvan/Schritte plus 1: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,io charset=utf8,umask=0077" "/dev/sr0" "/media/istvan/Schritte plus 1"' exited with non-zero exit status 32: mount: block device /dev/sr0 is write-protected, mounting read-onlymount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Code:
mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sr0" "/media/istvan/Schritte plus 1"DMESG gives this
Quote:
istvan@Asus:~$ dmesg | tail[ 241.475022] Sense Key : Illegal Request [current]
[ 241.475031] sr 4:0:0:0: [sr0]
[ 241.475040] Add. Sense: Illegal mode for this track
[ 241.475047] sr 4:0:0:0: [sr0] CDB:
[ 241.475050] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
[ 241.475072] end_request: I/O error, dev sr0, sector 0
[ 241.475079] Buffer I/O error on device sr0, logical block 0
[ 251.490344] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
[ 251.490364] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
[ 285.162939] perf samples too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
istvan@Asus:~$
Quote:
Nov 1 12:47:40 Asus kernel: [ 226.276190] usb 1-1: new high-speed USB device number 3 using ehci-pciNov 1 12:47:40 Asus kernel: [ 226.413192] usb 1-1: New USB device found, idVendor=0e8d, idProduct=1806
Nov 1 12:47:40 Asus kernel: [ 226.413209] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 1 12:47:40 Asus kernel: [ 226.413219] usb 1-1: Product: MT1806
Nov 1 12:47:40 Asus kernel: [ 226.413228] usb 1-1: Manufacturer: MediaTek Inc
Nov 1 12:47:40 Asus kernel: [ 226.413236] usb 1-1: SerialNumber: R8X76YAD700JTT
Nov 1 12:47:40 Asus mtp-probe: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
Nov 1 12:47:40 Asus mtp-probe: bus: 1, device: 3 was not an MTP device
Nov 1 12:47:40 Asus kernel: [ 226.469323] usb-storage 1-1:1.0: USB Mass Storage device detected
Nov 1 12:47:40 Asus kernel: [ 226.469634] scsi4 : usb-storage 1-1:1.0
Nov 1 12:47:40 Asus kernel: [ 226.469994] usbcore: registered new interface driver usb-storage
Nov 1 12:47:41 Asus kernel: [ 227.471237] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208DB TS01 PQ: 0 ANSI: 0
Nov 1 12:47:41 Asus kernel: [ 227.505200] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 1 12:47:41 Asus kernel: [ 227.505212] cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 1 12:47:41 Asus kernel: [ 227.505696] sr 4:0:0:0: Attached scsi CD-ROM sr0
Nov 1 12:47:41 Asus kernel: [ 227.506033] sr 4:0:0:0: Attached scsi generic sg1 type 5
Nov 1 12:47:55 Asus kernel: [ 241.470035] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470046] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.470053] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470058] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.470068] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.470077] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.470084] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.470089] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.470111] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.470120] Buffer I/O error on device sr0, logical block 0
Nov 1 12:47:55 Asus kernel: [ 241.472629] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472639] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.472646] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472651] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.472660] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.472669] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.472676] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.472681] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.472702] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.472712] Buffer I/O error on device sr0, logical block 0
Nov 1 12:47:55 Asus kernel: [ 241.475003] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475011] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Nov 1 12:47:55 Asus kernel: [ 241.475018] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475022] Sense Key : Illegal Request [current]
Nov 1 12:47:55 Asus kernel: [ 241.475031] sr 4:0:0:0: [sr0]
Nov 1 12:47:55 Asus kernel: [ 241.475040] Add. Sense: Illegal mode for this track
Nov 1 12:47:55 Asus kernel: [ 241.475047] sr 4:0:0:0: [sr0] CDB:
Nov 1 12:47:55 Asus kernel: [ 241.475050] Read(10): 28 00 00 00 00 00 00 00 02 00 00 00
Nov 1 12:47:55 Asus kernel: [ 241.475072] end_request: I/O error, dev sr0, sector 0
Nov 1 12:47:55 Asus kernel: [ 241.475079] Buffer I/O error on device sr0, logical block 0
Nov 1 12:48:05 Asus kernel: [ 251.490344] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
Nov 1 12:48:05 Asus kernel: [ 251.490364] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
Nov 1 12:48:39 Asus kernel: [ 285.162939] perf samples too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Nov 1 12:50:23 Asus kernel: [ 389.462118] UDF-fs: warning (device sr0): udf_load_vrs: No anchor found
Nov 1 12:50:23 Asus kernel: [ 389.462130] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
mount.ntfs
mount-ntfs-3g
in menu DISKS, I have automatic MOUNT options enabled
it also says here "Content" = UDF not mounted
↧
Asus K52Jc suspend/hibernation broken on 15.04, 15.10 workaround found
Hello,
I have a problem with my old ASUS K52Jc laptop. On newer linux distributions suspend & hibernation does not work correctly. When I put laptop to sleep everything works as one would expect - but when I woke my computer {hybernation or sleep - does not matter} there is 30-50% chance, that system freeze after showing Login manager (gdm, slim, lightdm...) or terminal login prompt. After spending few evenings investigating (using help provided here https://wiki.ubuntu.com/DebuggingKernelSuspend) I found that network driver (jme) is the problem. So I put following into /lib/systemd/system-sleep/remove-jme.sh :
#!/bin/bash
[ "$1" = "post" ] && /sbin/modprobe jme
[ "$1" = "pre" ] && /sbin/modprobe -r jme
exit 0
And suspend started working 100% correctly. {I dont use hibernation very often, so I dont know, if thaw from hibernation would work flawlesly}. But this solution does not work very well for KVM Virtual Machines with bridged virtual net interfaces.
After few months I found that when disable WakeOnLan before suspend using command "ethtool -s eth0 wol d" I always can resume without crash/freeze. This network interfaces WoL is set on g (magic packet) by default after startup (maybee even from POST).
Hibernation is another story - when system boots up, I dont have option to run "ethtool -s eth0 wol d" before system is loaded to RAM from swap, so it freeze on some occasions. But this does not concern me very much - suspend to ram works at least.
I would like to ask, where can I report this bug and hopefully get it fixed :) On Debian 7 wheezy, ubuntu 14.04, antix and other distributions without systemd, sleep and hibernation usually works, but on newer distros with systemd like ubuntu 15.04, 15.10, Debian 8 jessie, fedora 22, manjaro (archlinux) suspending requieres this "ethtools -s eth0 wol d" workaround, so I thing systemd makes something very differently from other init approaches.
Thank you for your help and sorry for my bad English
I have a problem with my old ASUS K52Jc laptop. On newer linux distributions suspend & hibernation does not work correctly. When I put laptop to sleep everything works as one would expect - but when I woke my computer {hybernation or sleep - does not matter} there is 30-50% chance, that system freeze after showing Login manager (gdm, slim, lightdm...) or terminal login prompt. After spending few evenings investigating (using help provided here https://wiki.ubuntu.com/DebuggingKernelSuspend) I found that network driver (jme) is the problem. So I put following into /lib/systemd/system-sleep/remove-jme.sh :
#!/bin/bash
[ "$1" = "post" ] && /sbin/modprobe jme
[ "$1" = "pre" ] && /sbin/modprobe -r jme
exit 0
And suspend started working 100% correctly. {I dont use hibernation very often, so I dont know, if thaw from hibernation would work flawlesly}. But this solution does not work very well for KVM Virtual Machines with bridged virtual net interfaces.
After few months I found that when disable WakeOnLan before suspend using command "ethtool -s eth0 wol d" I always can resume without crash/freeze. This network interfaces WoL is set on g (magic packet) by default after startup (maybee even from POST).
Hibernation is another story - when system boots up, I dont have option to run "ethtool -s eth0 wol d" before system is loaded to RAM from swap, so it freeze on some occasions. But this does not concern me very much - suspend to ram works at least.
I would like to ask, where can I report this bug and hopefully get it fixed :) On Debian 7 wheezy, ubuntu 14.04, antix and other distributions without systemd, sleep and hibernation usually works, but on newer distros with systemd like ubuntu 15.04, 15.10, Debian 8 jessie, fedora 22, manjaro (archlinux) suspending requieres this "ethtools -s eth0 wol d" workaround, so I thing systemd makes something very differently from other init approaches.
Thank you for your help and sorry for my bad English
↧
↧
[lubuntu] WebCam Samsung VG-STC3000 does not work
WebCam is defined as 04e8: 205c
Anyway program Cheese, guvcview can not work with it.
The specifications of Samsung stated:
Chip AIT8453;
Embedded 32-bit CPU / 500MHZ
On-Chip ISP up to 8MP
MJPEG 1080P @ 30fps
H.264 1080P @ 30fps
Built-in
- I2S interface
- USB2.0
Compliant with UVC 1.0 / 1.1 and UAC 1.0
v4l2-ctl --all issues:
Driver name: uvcvideo
Card type: USB2.0 UVC HQ WebCam
Bus info: usb-0000: 00: 1d.7-4
Driver version: 3.19.8
Capabilities: 0x84200001
Video Capture
Streaming
Device Capabilities
Device Caps: 0x04200001
Video Capture
Streaming
Priority: 2
Video input: 0 (Camera 1: ok)
Format Video Capture:
Width / Height: 640/480
Pixel Format: 'YUYV'
Field: None
Bytes per Line: 1280
Size Image: 0
Colorspace: SRGB
Custom Info: feedcafe
Crop Capability Video Capture:
Bounds: Left 0, Top 0, Width 640, Height 480
Default: Left 0, Top 0, Width 640, Height 480
Pixel Aspect: 1/1
Streaming Parameters Video Capture:
Capabilities: timeperframe
Frames per second: invalid (1/0)
Read buffers: 0
Information on the Internet is not found ...:(
Anyway program Cheese, guvcview can not work with it.
The specifications of Samsung stated:
Chip AIT8453;
Embedded 32-bit CPU / 500MHZ
On-Chip ISP up to 8MP
MJPEG 1080P @ 30fps
H.264 1080P @ 30fps
Built-in
- I2S interface
- USB2.0
Compliant with UVC 1.0 / 1.1 and UAC 1.0
v4l2-ctl --all issues:
Driver name: uvcvideo
Card type: USB2.0 UVC HQ WebCam
Bus info: usb-0000: 00: 1d.7-4
Driver version: 3.19.8
Capabilities: 0x84200001
Video Capture
Streaming
Device Capabilities
Device Caps: 0x04200001
Video Capture
Streaming
Priority: 2
Video input: 0 (Camera 1: ok)
Format Video Capture:
Width / Height: 640/480
Pixel Format: 'YUYV'
Field: None
Bytes per Line: 1280
Size Image: 0
Colorspace: SRGB
Custom Info: feedcafe
Crop Capability Video Capture:
Bounds: Left 0, Top 0, Width 640, Height 480
Default: Left 0, Top 0, Width 640, Height 480
Pixel Aspect: 1/1
Streaming Parameters Video Capture:
Capabilities: timeperframe
Frames per second: invalid (1/0)
Read buffers: 0
Information on the Internet is not found ...:(
↧
[all variants] Do I *need* windows installed for Ubuntu to work correctly?
I am about to build a new home server. I have built several new desktops that dual boot. However, one didn't work correctly until I put windows on it. Will I have any issues with newer motherboards on a Ubuntu-only system? Im just concerned as the old system is BIOS.
↧
Printing woes....Or rather lack of printing
Hello all -
I'm running ubuntu 15.04 on a Asus laptop. Everything seems to be working (well the fn brightness didn't but i ended up using - indicator brightness and all is good.) Now my next project is :
Installing a printer.
The setup is as follows - wireless router - Asus RT-N66U. The printer - Brother HL-2140. I've added the printer via system settings / printer/ LPD/LPR / added the ip address and attempted to print out a test page.
When I check the printer status in ubuntu , it says - Held. I've released it but it reverts back to the same thing. I then see a message in the print status window that the printer "may not be connected." Keep in mind i have no issues printing from windows ( from my other laptop or desktop.)
I'm running ubuntu 15.04 on a Asus laptop. Everything seems to be working (well the fn brightness didn't but i ended up using - indicator brightness and all is good.) Now my next project is :
Installing a printer.
The setup is as follows - wireless router - Asus RT-N66U. The printer - Brother HL-2140. I've added the printer via system settings / printer/ LPD/LPR / added the ip address and attempted to print out a test page.
When I check the printer status in ubuntu , it says - Held. I've released it but it reverts back to the same thing. I then see a message in the print status window that the printer "may not be connected." Keep in mind i have no issues printing from windows ( from my other laptop or desktop.)
↧
Projector 3D output, HDMI Frame Packing (1920x2205)
Good evening
I'm attempting to get a 3D output to a home projector
The Projector is an Optima 1070X Active 3D Projector using a HDMI 1.4a connection. The Graphics card is a Raedon HD 7970 using the open source drivers.
Here is what I've done and managed so far to force the 3D resolution as shown here. http://hdguru.com/3d-hdtv-and-hdmi-explained/1336/
Using the following commands I've setup the correct resolution (I believe)
When doing this, the projector HUD Information shows that it's functioning at 2205x1920 @ 24Hz. The native resolution for this device is 1080x1920. At 2205x1920@24 the projector display just freezes and it increases the internal Fan. Seemingly not positive for the projector.
This projector has been tested through windows using a horrible program called PowerDVD on this computer (dual boot) and this is able to change the projector to 3D and function OK. So on a hardware level, things are suitable it seems.
To do some extra testing, I have a LG TV that supports 3D frame packing through HDMI. So I connected this to the computer and set the output to 2205x1920_24. The TV will change to 3D automatically and works very well.
I get the feeling that some devices will change to 3D Frame packing mode by just the resolution only, while maybe the projector is wanting a 'special packet' to indicate a 3D signal.
Wondering if anyone has any experience in this or any idea's of how I can get this projector in 3D mode through Linux.
The projector can only manually be placed in 3D mode when a 1080p display is been sent (SBS / OU) but this half's the resolution to each eye, which is why I wish to try and use Frame Packing.
Thank you for any feedback
Regards ~
I'm attempting to get a 3D output to a home projector
The Projector is an Optima 1070X Active 3D Projector using a HDMI 1.4a connection. The Graphics card is a Raedon HD 7970 using the open source drivers.
Here is what I've done and managed so far to force the 3D resolution as shown here. http://hdguru.com/3d-hdtv-and-hdmi-explained/1336/
Using the following commands I've setup the correct resolution (I believe)
Code:
$ cvt 1920 2205 24
# 1920x2205 23.99 Hz (CVT) hsync: 53.70 kHz; pclk: 135.75 MHz
Modeline "1920x2205_24.00" 135.75 1920 2024 2224 2528 2205 2208 2218 2238 -hsync +vsync
$ xrandr --newmode "1920x2205_24.00" 135.75 1920 2024 2224 2528 2205 2208 2218 2238 -hsync +vsync
$ xrandr --addmode HDMI-0 "1920x2205_24.00"
$ xrandr --output HDMI-0 --mode "1920x2205_24.00"This projector has been tested through windows using a horrible program called PowerDVD on this computer (dual boot) and this is able to change the projector to 3D and function OK. So on a hardware level, things are suitable it seems.
To do some extra testing, I have a LG TV that supports 3D frame packing through HDMI. So I connected this to the computer and set the output to 2205x1920_24. The TV will change to 3D automatically and works very well.
I get the feeling that some devices will change to 3D Frame packing mode by just the resolution only, while maybe the projector is wanting a 'special packet' to indicate a 3D signal.
Wondering if anyone has any experience in this or any idea's of how I can get this projector in 3D mode through Linux.
The projector can only manually be placed in 3D mode when a 1080p display is been sent (SBS / OU) but this half's the resolution to each eye, which is why I wish to try and use Frame Packing.
Thank you for any feedback
Regards ~
↧
↧
[ubuntu] Overclocking My Dell Inspiron 5520 14.04.03
Hello,
I'd like to overclock my Dell Inspiron 5520 Notebook. Is there a software to do this?
Thanks, Hannibal
I'd like to overclock my Dell Inspiron 5520 Notebook. Is there a software to do this?
Thanks, Hannibal
↧
Laptop WiFi Fails to Restart after Resuming from Sleep/Suspend
The network card on a Lenovo Thinkpad X230 laptop was not responding after sleep/suspend. Here's the card info:
description: Wireless interface
product: Centrino Advanced-N 6205 [Taylor Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 34
serial: e0:9d:31:2f:ea:64
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.2.0-16-generic firmware=18.168.6.1 ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:32 memory:f1c00000-f1c01fff
I followed some old solutions found on the forum here and added a "config" file in /etc/pm/config.d/ with the value SUSPEND_MODULES="iwlwifi". This appears to match the driver in use as seen above. However, the problem still occurs randomly. I have to reboot entirely to get wifi to work again, and this is extremely annoying, especially when I'm multitasking with several applications open, and they all have to be restarted.
This only happened after I upgraded to 15.10. (I also had severe problems on another computer after upgrading to 15.10. Seems like an unstable release.) Not sure if it would matter, but I'm using Gnome.
description: Wireless interface
product: Centrino Advanced-N 6205 [Taylor Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 34
serial: e0:9d:31:2f:ea:64
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.2.0-16-generic firmware=18.168.6.1 ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:32 memory:f1c00000-f1c01fff
I followed some old solutions found on the forum here and added a "config" file in /etc/pm/config.d/ with the value SUSPEND_MODULES="iwlwifi". This appears to match the driver in use as seen above. However, the problem still occurs randomly. I have to reboot entirely to get wifi to work again, and this is extremely annoying, especially when I'm multitasking with several applications open, and they all have to be restarted.
This only happened after I upgraded to 15.10. (I also had severe problems on another computer after upgrading to 15.10. Seems like an unstable release.) Not sure if it would matter, but I'm using Gnome.
↧
Nvidia GTX 980 + multiple displays
I'm trying to get my desktop machine working with multiple displays. I really need them for work and can't skimp on having a single monitor. Anyways, here is the output for `xrandr -q`:
```
Screen 0: minimum 8 x 8, current 3520 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 connected primary 1920x1080+800+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.0*+ 59.9 50.0 60.1 60.0 50.0
1680x1050 60.0
1600x900 60.0
1280x1024 75.0 60.0
1280x800 59.8
1280x720 60.0 59.9 50.0
1024x768 75.0 60.0
800x600 75.0 60.3
720x576 50.0 50.1
720x480 59.9 60.1
640x480 75.0 59.9 59.9
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 connected 800x600+2720+32 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
Unknown-0 disconnected (normal left inverted right x axis y axis)
```
I need DVI-I-1 and DP-5 to both be at 1920x1080... I've tried a bunch of stuff but I'm not really great at figuring this out as it's been awhile since I've used Ubuntu desktop and a lot has changed since then. Please let me know how I can help provide the information needed to debug this together. 1 monitor (that works) is HDMI and the other 2 that are connected are both Display Ports; no matter what I do, they're unrecognized and won't go past 800x600 resolution...
Thanks in advance!!!
```
Screen 0: minimum 8 x 8, current 3520 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 connected primary 1920x1080+800+0 (normal left inverted right x axis y axis) 531mm x 298mm
1920x1080 60.0*+ 59.9 50.0 60.1 60.0 50.0
1680x1050 60.0
1600x900 60.0
1280x1024 75.0 60.0
1280x800 59.8
1280x720 60.0 59.9 50.0
1024x768 75.0 60.0
800x600 75.0 60.3
720x576 50.0 50.1
720x480 59.9 60.1
640x480 75.0 59.9 59.9
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 connected 800x600+2720+32 (normal left inverted right x axis y axis) 0mm x 0mm
800x600 60.3*+
Unknown-0 disconnected (normal left inverted right x axis y axis)
```
I need DVI-I-1 and DP-5 to both be at 1920x1080... I've tried a bunch of stuff but I'm not really great at figuring this out as it's been awhile since I've used Ubuntu desktop and a lot has changed since then. Please let me know how I can help provide the information needed to debug this together. 1 monitor (that works) is HDMI and the other 2 that are connected are both Display Ports; no matter what I do, they're unrecognized and won't go past 800x600 resolution...
Thanks in advance!!!
↧