Quantcast
Channel: Ubuntu Forums - Hardware
Viewing all 20190 articles
Browse latest View live
↧

[ubuntu] Hp scanner install problem.

July 17, 2017, 9:36 am
$
0
0
Hi folks, new user Arturo here.
I'm running Ubuntu 16.04 LTS and have just purchased an HP Laser Jet Pro MFP M227fdw. I've got the printer running using an ethernet cable connection, but can't seem to get it to detect the scanner.
I've tried installing the hplip program and the sane find scanner. Below is the error message I've received:
Any help would be appreciated.
Thanks,
Arturo




No devices found.


---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------



HP-HP-LaserJet-MFP-M227-M231
----------------------------
Type: Unknown
Device URI: dnssd://HP%20LaserJet%20MFP%20M227fdw%20(0CB92A)._ipp._tcp .local/?uuid=564e4233-4331-3136-3436-c8d3ff0cb92a
PPD: /etc/cups/ppd/HP-HP-LaserJet-MFP-M227-M231.ppd
PPD Description: HP LaserJet MFP M527 Postscript (recommended)
Printer status: printer HP-HP-LaserJet-MFP-M227-M231 is idle. enabled since Thu 13 Jul 2017 11:38:43 PM PDT
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.


OKI-DATA-CORP-MB471
-------------------
Type: Unknown
Device URI: usb://OKI%20DATA%20CORP/MB471?serial=AK26034918&interface=1
PPD: /etc/cups/ppd/OKI-DATA-CORP-MB471.ppd
PPD Description: OKI DATA CORP MB471(PS)
Printer status: printer OKI-DATA-CORP-MB471 disabled since Tue 11 Jul 2017 11:36:33 AM PUnplugged or turned off
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.




--------------
| PERMISSION |
--------------



-----------
| SUMMARY |
-----------


Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp-mibs-downloader' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libjpeg-dev' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'openssl' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible


Missing Optional Dependencies
-----------------------------
error: 'python3-notify2' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible


Total Errors: 14
Total Warnings: 2
↧
Search

Nvidia driver with a laptop video card with custom firmware.

July 17, 2017, 10:04 am
$
0
0
Hello I installed Ubuntu 17.04 on a Clevo laptop with a GTX 970m and it has been flashed with custom firmware to allow overclocking.
When I used this laptop and video card under Windows, the only driver that I could use was a custom driver provided by Sager that has a custom device id list.
When I use lspci command to look at my video cards info, the results look familiar to what I was using under the Sager driver.
How ever when I switch from nouveau to the Nvidia driver under proprietary drivers, the Nvidia driver does not seem to be engaging.
The Nvidia settings app is empty, and running the Heaven benchmark app provides same results under both drivers.
I am pretty sure that what needs to happen for me with Ubuntu with the Nvidia driver is similar to what I have to do with Windows, the driver needs the correct device (under windows the driver has a list of device ids in a inf file) id to be able to install correctly.
But so far I'm having trouble finding out exactly what I need to do to get the Nvidia driver in Ubuntu to work correctly with my customized video card.

Any help will be appreciated!
Thank you,
Jonathan Duncan.
↧
↧

16.10 crashes and reports talk of amd architecture

July 17, 2017, 10:52 am
$
0
0
Hi
since allowing Ubuntu to upgrade to 16.10 it has become unstable and crashes, when it tries to create an error report it lists problems with amd architecture but my pc is Intel is it possible it has somehow installed the wrong architecture?
↧

[ubuntu] dkms stuck while building nvidia module

July 17, 2017, 10:53 am
↧

[ubuntu] Confusion regarding internal soundcard v. usb and source of audio (kx studio) and Jac

July 17, 2017, 8:55 pm
$
0
0
HI,

I want to run kxstudio + Jack + guitarix
+ Scarlett 2i2

Jack is running
Guitarix is running
I am getting a signal :)

Unfortunately, the signal is coming from the internal mic of my laptop.

How do I set the inputs and default sound card under KDE?

Pictures of settings:
http://imgur.com/a/4oykM
http://imgur.com/ETTjr4o
↧
↧

[lubuntu] MDADM vs fakeRAID on old PC

July 18, 2017, 12:39 am
$
0
0
Hi, I have a local media server which runs Lubuntu 16. It's an old PC, Intel Pentium 4. and I run out of space in the storage I found that linux has MDADM to create RAID Array.. Well, I'm thinking that software is too hard for my Intel Pentium 4 to handle.. so, i was searching cheap RAID hardware.. but, some people on internet said cheap RAID hardware isn't a great idea.. and a wiki says linux software raid is recommended over fakeRAID/cheap RAID hardware.. and the biggest problem is i don't know if that cheap RAID hardware would work or not on my local media server.. what's your opinion?
i still have to buy a card whatever the option is.. and there is 3 options:
1. buy SATA expansion card for MDADM to create RAID
2. buy fakeRAID / cheap RAID hardware to create RAID
3. buy SATA expansion card to add partition and NOT creating RAID (only if creating RAID on my server is a bad idea)
Note: i already have unused HDDs, that's why i won't buy new HDD
Thank you
↧

A problem with NVidia driver after updating KUbuntu 14.04

July 18, 2017, 3:46 am
$
0
0
Hello!
After I updated my KUbuntu 14.04.5 LTS with 'aptitude safe-upgrade' and restarted my machine I did not see the graphical login screen. Console login screen appeared for a shot time period and then the screen became completely black.
I am not expert in Ubuntu, so I googled a bit and did all the steps of the instruction on how to repair the machine after installing some restricted NVidia drivers. Fortunately it helped, and now I am able to log in and looks like all the UI functionality works, but at the same time UI is significantly slowed down, and I have an impression that some kind of hardware acceleration is switched off. If I run an application that renders real-time data with OpenGL, all the applications start to work very slow. Also I noticed that there is a process 'compiz' that consumes 5 - 50% CPU depending on how many UI applications are started.

my system information:
lspci | grep VGA:
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 745] (rev a2)

lshw -c video
*-display UNCLAIMED
description: VGA compatible controller
product: GM107 [GeForce GTX 745]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list
configuration: latency=0
resources: memory:f6000000-f6ffffff memory:e0000000-efffffff memory:f0000000-f1ffffff ioport:e000(size=128) memory:f7000000-f707ffff

xdpyinfo | grep dimensions
dimensions: 2560x1440 pixels (677x381 millimeters)

CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz
↧

[ubuntu] cant install Intel HD graphics driver

July 18, 2017, 11:39 am
$
0
0
am not able to install Intel hd graphics driver in ubuntu 16.04 LTS. Can anyone sove this
↧
Search

[ubuntu] MSI GS60 Ghost Pro

July 18, 2017, 2:58 pm
$
0
0
Hey guys,

I'm a relatively new user to Ubuntu. I got my MSI laptop to dual boot windows and ubuntu around two months ago. Recently, I've started to notice that the battery life on my laptop is very short when I boot into Ubuntu and I've been looking at various forums for a fix but still haven't found one that helps yet.

I appreciate any kind of help/tips. Please let me know if I should provide anymore information (this is my first time posting in a forum about anything tech related)

Thanks in advance!
↧
↧

[lubuntu] Laser Jet Pro MFP M227fdw driver needed

July 18, 2017, 7:06 pm
$
0
0
I've not been able to scan with my new multi function HP. Printing works just fine, but I've not been able to get hplip to run.
I've downloaded the most recent version, but when I try to run the program, I receive an error message saying there are "text errors" in the program.
Has anyone had any success in scanning with this particular model?
Thanks,
Art
↧

No sound cards found in Ubunut16.04 XPS13

July 19, 2017, 4:02 am
$
0
0
Hi,

I had an issue with my Dell XPS 13 where the sound would stop working suddenly and would start again after reboot. I tried to fix this issue by following some online instructions and now I dont have any sound, system says no soundcards found and my sound settings shows Dummy Output. Please help!
↧

[ubuntu] working with & oveclocking AMD GPUs

July 19, 2017, 4:26 am
$
0
0
Hi,

I started working with AMD GPUs on an ubuntu server for computational purposes. I'm trying to figure out how to make them work efficiently and also how to overclock them. I have had good results with nVidia cards in this respect, but my results with AMD are not that good. I'll compare results with nVidia here and then, where nVidia experiences are with the same motherboard.

I've tried ubuntu 17.04 and also 16.04 LTS. the results are similar. the specific examples below come from 16.04 LTS, as it is said that AMD supports LTS only.

Any pointers below appreciated.

I have an ASRock H81 Pro BTC 2.0 motherboard with 6 ASUS AMD RX 580 cards connected. All cards show up as expected. I also see them through the /sys/class/drm/cardX/device interface:

Code:
$ cat /sys/class/drm/card[1-6]/device/pp_num_states
states: 2
0 boot
1 performance
states: 2
0 boot
1 performance
states: 2
0 boot
1 performance
states: 2
0 boot
1 performance
states: 2
0 boot
1 performance
states: 2
0 boot
1 performance
$ cat /sys/class/drm/card[1-6]/device/pp_cur_state
1
1
1
1
1
1
$ cat /sys/class/drm/card[1-6]/device/pp_dpm_pcie
0: 2.5GB, x8 *
1: 5.0GB, x16
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
$ cat /sys/class/drm/card[1-6]/device/pp_dpm_sclk
0: 300Mhz
1: 600Mhz
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz
0: 300Mhz
1: 600Mhz
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz *
0: 300Mhz
1: 600Mhz *
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz
0: 300Mhz
1: 600Mhz *
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz
0: 300Mhz
1: 600Mhz
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz *
0: 300Mhz
1: 600Mhz *
2: 900Mhz
3: 1162Mhz
4: 1233Mhz
5: 1275Mhz
6: 1319Mhz
7: 1360Mhz
$ cat /sys/class/drm/card[1-6]/device/pp_dpm_mclk
0: 300Mhz
1: 1000Mhz
2: 1750Mhz
0: 300Mhz
1: 1000Mhz
2: 1750Mhz *
0: 300Mhz *
1: 1000Mhz
2: 1750Mhz
0: 300Mhz *
1: 1000Mhz
2: 1750Mhz
0: 300Mhz
1: 1000Mhz
2: 1750Mhz *
0: 300Mhz *
1: 1000Mhz
2: 1750Mhz
the above are displayed when the cards are under computational load.

as you see, the cards are not really putting out peak performance. also, the cards behave differently, although the load on them is the same.

most notably:

1. card1 is on an x8 PCI connection, while all others are on x16:

Code:
$ cat /sys/class/drm/card[1-6]/device/pp_dpm_pcie
0: 2.5GB, x8 *
1: 5.0GB, x16
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
0: 2.5GB, x8
1: 5.0GB, x16 *
and I don't see the way to change this. as a result, card1 operates significantly (about 4 times) slower. on the same motherboard, there are no such issues with nVidia. I don't see any option to set this bus speed in the BIOS. it's also strange that the x16 option is there, but it's still x8 for card1, while x16 for all others. (one can't just "echo 1 > pp_dpm_pcie", it's not a read-write interface)


2. memory and GPU clock speeds are inconsistent

see above for the pp_dpm_sclk and pp_dpm_mclk outputs. again, card1 behaves strangely in the sense that no * (indication) appears beside the memory clock readings. also, while all cards are under computational load, some have a 300MHz memory clock, while others 1750MHz. I'd prefer to set this to 1750MHz, for all of them.


3. I've tried to use ROC-smi from AMD: https://github.com/RadeonOpenCompute/ROC-smi , but it's not really giving good results.

Code:
$ ./rocm-smi

====================    ROCm System Management Interface    ====================
================================================================================
 GPU  DID    Temp    AvgPwr  SCLK    MCLK    Fan      Perf    OverDrive  ECC
GPU[0]                : PowerPlay not enabled - Cannot get supported clocks
GPU[0]                : PowerPlay not enabled - Cannot get supported clocks
  0  0402  N/A      N/A      N/A      N/A      None%              N/A      N/A     
  1  67df  48.0c    N/A      N/A      N/A      42.75%  auto      0%      N/A     
  2  67df  74.0c    N/A      600Mhz  1750Mhz  85.88%  auto      0%      N/A     
  3  67df  76.0c    N/A      300Mhz  1000Mhz  84.71%  auto      0%      N/A     
  4  67df  72.0c    N/A      600Mhz  1750Mhz  83.92%  auto      0%      N/A     
  5  67df  66.0c    N/A      600Mhz  1750Mhz  82.75%  auto      0%      N/A     
  6  67df  61.0c    N/A      600Mhz  300Mhz  84.71%  auto      0%      N/A     
================================================================================
====================          End of ROCm SMI Log          ====================
note: card0 is the built-in motherboard card

note that it can't read card1 GPU and clock speeds either.

moreover, if I try ti set anything, the cards will somehow reconfigure and reduce their computing capacity. basically using ROC-smi will somehow put the cards into some minimal configuration state. totally not what one would expect.

I also tried amdcovc: https://github.com/matszpk/amdcovc - with similarly bad results.

needless to say, nvidia-smi works with nVidia cards on the same motherboard fine (with the caveat that it needs an X server running on each card)


can any one point me into directions I can make these cards work? get card1 to work on an x16 bus? set memory clocks explicitly?

as you see, it's not even at the point of overclocking at first, at first I just want to get these cards to work properly.
↧

(Ubuntu 16.04) Blackscreen after installing AMDGPU-PRO drivers R9 380X

July 19, 2017, 1:30 pm
$
0
0
I have ubuntu 16.04 installed with a R9 380X gfx card. I installed the latest AMDGPU-PRO driver but after the install every time i reboot the screen goes offline for about 10-13 seconds, the gpu fans spin to 100% (i fix this with a script i found on github ) but still is this normal? also i dont actually know if ubuntu uses this driver. After 10-13 seconds as i mentioned before the system boots normally with the correct resolution but i get this output:

Code:
lspci -k | grep -EA2 'VGA|3D'
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Amethyst XT [Radeon R9 M295X Mac Edition / R9 380X] (rev f1)
Subsystem: PC Partner Limited / Sapphire Technology Tonga XT / Amethyst XT [Radeon R9 380X / R9 M295X Mac Edition] (Radeon R9 380X Nitro 4G D5)
Kernel driver in use: amdgpu
Does this mean the driver doesnt work like it should? i suppose maybe the system tries to use the AMDGPU-PRO and falls back to the old driver i had ?

Code:
dpkg -l amdgpu-pro
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad
|/ Name          Version      Architecture Description
++-==============-============-============-=================================
ii  amdgpu-pro    17.10-450821 amd64        Meta package to install amdgpu Pro
I also added my user to video group.


Code:
Kernel used :  4.8.0-58-generic #63~16.04.1-Ubuntu SMP Mon Jun 26 18:08:51 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Anyone knows how to fix this? amdgpu-pro driver is better than the stock driver ubuntu comes with?

Thanks!
↧
↧

Printer Driver Issue

July 20, 2017, 11:58 am
$
0
0
i have an issue with a printer driver in the new version of Linux Mint and they suggested I ask if any Ubuntu users have the same issue to see if the problem is the driver or Linux Mint.

My printer is a Canon iX6820. The driver was downloaded from Canon as the recommended driver for Ubuntu. It works flawlessly in linux Mint 17.3 but not the newer version, 18.2.

Here's the problem. I have a checklist created in LibreOffice Writer that is multiple columns on a landscape legal size page. When it prints from a saved .odt, .doc, or .docx file, it prints part of it sideways at the top of the page so only the center section of the text prints. My scanner won't scan a legal document so these files are shortened a bit but the part dropped off is only blank paper and you can still see what it's doing.

If I save it as a .pdf and print it, it shrinks the whole list so it fits sideways on a legal page, still oriented 'portrait' although the document is set to 'landscape'.
Document1.jpgDocument2.jpg

I've tried every possible setting on the printer for landscape & portrait both in each print job or in printer defaults. All other Writer files, print fine but they aren't oriented 'landscape'. This file printed fine on this computer when I had mint 17.3 on it and the same driver installed.

The issue is not a corrupted file because I created a whole new document using text boxes instead of columns and the result is the same (that's the document in the photos).

I can put the file on a flash drive and print it fine on my wife's computer still with Mint 17.3 Cinnamon.

Thanks for any input on this. RG
Attached Images
↧

Erratic cursor on Synaptics touchpad driver

July 20, 2017, 2:44 pm
$
0
0
Hi,
My Acer ES1-531 laptop has a Synaptics touchpad driver and it acts extremely erratic after about an hour of use or less.

Here's the logs from 'xinput list':

jamie@jamie-Aspire-ES1-531:~$ xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SYN1B7F:00 06CB:7406 Touchpad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ VGA Webcam id=9 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
↳ Acer WMI hotkeys

Apparently this is a known bug, but hasn't been fixed. The same problems actually happen in Windows when I had it installed, too.
Could anyone guide me on how to fix it? Thanks!
↧
Search

Using the OpenSource drivers with Nvidia graphics

July 20, 2017, 3:01 pm
$
0
0
I purchased a Dell Inspiron 15 7559 gaming laptop (http://www.dell.com/en-us/work/shop/...ai157w10ph5716 or http://www.dell.com/en-us/shop/produ...15-7559-laptop). It has a Nvidia 960M graphics card in it, and I have had little to no luck getting it to work. I can use the proprietary drivers if I can get it to boot, but any attempt to have it only use the Intel graphics to save battery when I am not running a game causes a lockup. Not even the keyboard leds will respond, so the problem is not just visual. I could just leave it with the Nvidia drivers and set it to use the discrete card all the time, but with how buggy it is already and the fact that Nvidia's drivers get worse over time (or so I'm told), I would like to get the nouveau drivers working.

It uses Optimus, so my chances are already bad, and it tends not to boot with the same lockup problem if I don't have the Nvidia drivers enabled. Still, I think the card is at least partially supported by nouveau (from the feature matrix at https://nouveau.freedesktop.org/wiki/FeatureMatrix/), so how do I get it to work with the nouveau drivers (although, some of it is WIP'd. That might be it...) and whatever the catch-of-the-day card switching application is?

My other option is either dealing with this thing's issues or trying to trade it in for an AMD graphics laptop (the one HP Omen looks nice, and the card is in the list for the Radeon driver).
↧

Which Light Ubuntu Distro should I install on this Laptop ?

July 20, 2017, 5:42 pm
$
0
0
My laptop Specs are :

Intel Celeron N3060 Dual-core (2 Core) 1.60 GHz

4 GB DDR3L SDRAM

64 GB SSD

1366 x 768 - Intel HD Graphics 400

so, I want a light Ubuntu Distro with a desktop Environment that is based on GTK ...
I had my mind set on Lubuntu at first, but heard that they are switching to LXQT so with that out of the way I have two options :

Ubuntu MATE &
Xubuntu

which one is the lighter one ...and what would be your recommendation considering the Specs of my laptop ? Is my laptop able to handle both of these distros ? if so, I prefer MATE....what do you think ?

Many Thanks
↧
↧

[all variants] Multiple Monitors being detected as a single "built-in" display

July 20, 2017, 6:52 pm
$
0
0
Hi all ):P,

I've pulled out my account just for this issue. Did a bunch of searching and it seems that nobody's posted about this issue before.

Ubuntu 16.04, fresh install, up-to-date as of posting, running the latest available kernel as of today.

Output of lspci command
Code:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H77 Express Chipset LPC Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 7 Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.5 IDE interface: Intel Corporation 7 Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode] (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn XT [Radeon HD 7870 GHz Edition]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
03:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
04:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
05:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
Output of
Code:
sudo systemctl status
Code:
● Coffee-Station
    State: running
    Jobs: 0 queued
  Failed: 0 units
    Since: Thu 2017-07-20 21:27:25 EDT; 19min ago
  CGroup: /
          ├─init.scope
          │ └─1 /sbin/init splash
          ├─system.slice
          │ ├─avahi-daemon.service
          │ │ ├─943 avahi-daemon: running [Coffee-Station.local
          │ │ └─991 avahi-daemon: chroot helpe
          │ ├─thermald.service
          │ │ └─904 /usr/sbin/thermald --no-daemon --dbus-enable
          │ ├─dbus.service
          │ │ ├─ 951 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
          │ │ └─1951 /usr/lib/x86_64-linux-gnu/fwupd/fwupd
          │ ├─ModemManager.service
          │ │ └─891 /usr/sbin/ModemManager
          │ ├─cron.service
          │ │ └─882 /usr/sbin/cron -f
          │ ├─wpa_supplicant.service
          │ │ └─1148 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
          │ ├─lightdm.service
          │ │ ├─1091 /usr/sbin/lightdm
          │ │ └─1110 /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
          │ ├─accounts-daemon.service
          │ │ └─884 /usr/lib/accountsservice/accounts-daemon
          │ ├─colord.service
          │ │ └─1333 /usr/lib/colord/colord
          │ ├─systemd-journald.service
          │ │ └─289 /lib/systemd/systemd-journald
          │ ├─snapd.service
          │ │ └─899 /usr/lib/snapd/snapd
          │ ├─udisks2.service
          │ │ └─1898 /usr/lib/udisks2/udisksd --no-debug
          │ ├─upower.service
          │ │ └─1292 /usr/lib/upower/upowerd
          │ ├─systemd-timesyncd.service
          │ │ └─847 /lib/systemd/systemd-timesyncd
          │ ├─systemd-logind.service
          │ │ └─921 /lib/systemd/systemd-logind
          │ ├─system-getty.slice
          │ │ └─getty@tty1.service
          │ │  └─1127 /sbin/agetty --noclear tty1 linux
          │ ├─systemd-udevd.service
          │ │ └─317 /lib/systemd/systemd-udevd
          │ ├─polkitd.service
          │ │ └─1074 /usr/lib/policykit-1/polkitd --no-debug
          │ ├─cups-browsed.service
          │ │ └─1003 /usr/sbin/cups-browsed
          │ ├─NetworkManager.service
          │ │ ├─1005 /usr/sbin/NetworkManager --no-daemon
          │ │ ├─2106 /sbin/dhclient -d -q -sf /usr/lib/NetworkManager/nm-dhcp-helper -pf /var/run/dhclient-wlp3s0.pid -lf /var/lib/NetworkManager/dhclient-453af70d-9780-41cb-9596-3b6d012a514d-wlp3s0.lease -cf /var/lib/NetworkManager/dhclient-wlp3s0.conf wlp3s0
          │ │ └─2120 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --no-hosts --bind-interfaces --pid-file=/var/run/NetworkManager/dnsmasq.pid --listen-address=127.0.1.1 --cache-size=0 --conf-file=/dev/null --proxy-dnssec --enable-dbus=org.freedesktop.NetworkManager.dnsmasq --conf-dir=/etc/NetworkManager/dnsmasq.d
          │ ├─irqbalance.service
          │ │ └─1076 /usr/sbin/irqbalance --pid=/var/run/irqbalance.pid
          │ ├─whoopsie.service
          │ │ └─913 /usr/bin/whoopsie -f
          │ ├─rsyslog.service
          │ │ └─925 /usr/sbin/rsyslogd -n
          │ ├─acpid.service
          │ │ └─896 /usr/sbin/acpid
          │ └─rtkit-daemon.service
          │  └─1284 /usr/lib/rtkit/rtkit-daemon
          └─user.slice
            └─user-1000.slice
              ├─user@1000.service
              │ └─init.scope
              │  ├─1392 /lib/systemd/systemd --user
              │  └─1400 (sd-pam)       
              └─session-c2.scope
                ├─1217 lightdm --session-child 12 19
                ├─1406 /usr/bin/gnome-keyring-daemon --daemonize --login
                ├─1415 /sbin/upstart --user
                ├─1498 upstart-udev-bridge --daemon --user
                ├─1506 dbus-daemon --fork --session --address=unix:abstract=/tmp/dbus-zyRMPpSHog
                ├─1518 /usr/lib/x86_64-linux-gnu/hud/window-stack-bridge
                ├─1547 upstart-file-bridge --daemon --user
                ├─1550 upstart-dbus-bridge --daemon --session --user --bus-name session
                ├─1554 upstart-dbus-bridge --daemon --system --user --bus-name system
                ├─1563 gpg-agent --homedir /home/brandon/.gnupg --use-standard-socket --daemon
                ├─1564 /usr/bin/ibus-daemon --daemonize --xim --address unix:tmpdir=/tmp/ibus
                ├─1579 /usr/lib/gvfs/gvfsd
                ├─1580 /usr/lib/x86_64-linux-gnu/bamf/bamfdaemon
                ├─1585 /usr/lib/gvfs/gvfsd-fuse /run/user/1000/gvfs -f -o big_writes
                ├─1588 /usr/lib/ibus/ibus-dconf
                ├─1589 /usr/lib/ibus/ibus-ui-gtk3
                ├─1597 /usr/lib/ibus/ibus-x11 --kill-daemon
                ├─1612 /usr/lib/ibus/ibus-engine-simple
                ├─1624 /usr/lib/x86_64-linux-gnu/hud/hud-service
                ├─1626 /usr/lib/unity-settings-daemon/unity-settings-daemon
                ├─1631 /usr/lib/at-spi2-core/at-spi-bus-launcher --launch-immediately
                ├─1633 /usr/lib/gnome-session/gnome-session-binary --session=ubuntu
                ├─1640 /usr/lib/x86_64-linux-gnu/unity/unity-panel-service
                ├─1641 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
                ├─1653 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
                ├─1676 /usr/lib/dconf/dconf-service
                ├─1690 /usr/lib/x86_64-linux-gnu/indicator-messages/indicator-messages-service
                ├─1691 /usr/lib/x86_64-linux-gnu/indicator-bluetooth/indicator-bluetooth-service
                ├─1692 /usr/lib/x86_64-linux-gnu/indicator-power/indicator-power-service
                ├─1700 /usr/lib/x86_64-linux-gnu/indicator-datetime/indicator-datetime-service
                ├─1704 /usr/lib/x86_64-linux-gnu/indicator-keyboard/indicator-keyboard-service --use-gtk
                ├─1705 /usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service
                ├─1706 /usr/lib/x86_64-linux-gnu/indicator-printers/indicator-printers-service
                ├─1707 /usr/lib/x86_64-linux-gnu/indicator-session/indicator-session-service
                ├─1723 /usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service
                ├─1752 /usr/bin/pulseaudio --start --log-target=syslog
                ├─1759 /usr/lib/evolution/evolution-source-registry
                ├─1774 compiz
                ├─1804 /usr/lib/evolution/evolution-calendar-factory
                ├─1811 /usr/lib/evolution/evolution-calendar-factory-subprocess --factory contacts --bus-name org.gnome.evolution.dataserver.Subprocess.Backend.Calendarx1804x2 --own-path /org/gnome/evolution/dataserver/Subprocess/Backend/Calendar/1804/2
                ├─1823 /usr/lib/evolution/evolution-addressbook-factory
                ├─1826 /usr/lib/evolution/evolution-calendar-factory-subprocess --factory local --bus-name org.gnome.evolution.dataserver.Subprocess.Backend.Calendarx1804x3 --own-path /org/gnome/evolution/dataserver/Subprocess/Backend/Calendar/1804/3
                ├─1838 /usr/lib/evolution/evolution-addressbook-factory-subprocess --factory local --bus-name org.gnome.evolution.dataserver.Subprocess.Backend.AddressBookx1823x2 --own-path /org/gnome/evolution/dataserver/Subprocess/Backend/AddressBook/1823/2
                ├─1852 nautilus -n
                ├─1855 /usr/bin/gnome-software --gapplication-service
                ├─1859 nm-applet
                ├─1861 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1
                ├─1864 /usr/lib/unity-settings-daemon/unity-fallback-mount-helper
                ├─1890 /usr/lib/gvfs/gvfs-udisks2-volume-monitor
                ├─1922 /usr/lib/gvfs/gvfs-afc-volume-monitor
                ├─1928 /usr/lib/gvfs/gvfs-goa-volume-monitor
                ├─1933 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
                ├─1943 /usr/lib/gvfs/gvfs-mtp-volume-monitor
                ├─1966 /usr/lib/gvfs/gvfsd-trash --spawner :1.5 /org/gtk/gvfs/exec_spaw/0
                ├─1999 /usr/lib/firefox/firefox
                ├─2049 /usr/lib/x86_64-linux-gnu/gconf/gconfd-2
                ├─2094 /usr/lib/x86_64-linux-gnu/notify-osd
                ├─2261 zeitgeist-datahub
                ├─2268 /bin/sh -c /usr/lib/x86_64-linux-gnu/zeitgeist/zeitgeist-maybe-vacuum; /usr/bin/zeitgeist-daemon
                ├─2272 /usr/bin/zeitgeist-daemon
                ├─2279 /usr/lib/x86_64-linux-gnu/zeitgeist-fts
                ├─2318 update-notifier
                ├─2345 /usr/lib/x86_64-linux-gnu/deja-dup/deja-dup-monitor
                ├─2434 /usr/lib/firefox/plugin-container /usr/lib/flashplugin-installer/libflashplayer.so -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 1999 true plugin
                ├─2630 /usr/lib/gnome-terminal/gnome-terminal-server
                ├─2637 bash
                ├─2671 sudo systemctl status
                └─2672 systemctl status
Contents of
Code:
/usr/share/X11/xorg.conf.d/10-amdgpu.conf
Section "OutputClass"
    Identifier "AMDgpu"
    MatchDriver "amdgpu"
    Driver "amdgpu"
EndSection
The CPU isn't a Xeon though, it's an i5-3570K

Lastly, both displays are functional and have the desktop being output to them. At the moment, I have a mirrored setup, but Screen Display in the settings shows single "Built-in Display" with no option to add a second one.

If there's any other information that I can provide I'd be more than happy to. I just have no idea what this issue is related to and I'm thinking that my GPU my simply be gone caputz at this point. It's a few years old.
↧

bluetooth cann't detect any device ubuntu 16.04

July 21, 2017, 4:22 am
$
0
0
hello guys!!
i have problem with my fujitsu lifebook t731 bluetooth,it's can not detect and pair with my phone and my headset, it happened after i upgraded to ubuntu 16.04 i guess
note : i try ubuntu 16.04, linux mint (sarah), and now on linux lite and all these distributions have the same problem
here is my info
---------------------------------------------------------
ninjago@ninjago-LIFEBOOK-T731:~$ uname -a; lspci -nnk | grep -iA2 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
Linux ninjago-LIFEBOOK-T731 4.4.0-85-generic #108-Ubuntu SMP Mon Jul 3 17:23:59 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Fujitsu Limited. 82579LM Gigabit Network Connection [10cf:161b]
Kernel driver in use: e1000e
Kernel modules: e1000e
--
0a:00.0 Network controller [0280]: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) [168c:002e] (rev 01)
Subsystem: Fujitsu Limited. AR9287 Wireless Network Adapter (PCI-Express) [10cf:158f]
Kernel driver in use: ath9k
Kernel modules: ath9k
Bus 002 Device 005: ID 0489:e031 Foxconn / Hon Hai
Bus 002 Device 004: ID 056a:00e6 Wacom Co., Ltd
Bus 002 Device 003: ID 04f2:b169 Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 275d:0ba6
Bus 001 Device 003: ID 08ff:2683 AuthenTec, Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[ 18.607775] Bluetooth: Core ver 2.21
[ 18.607823] Bluetooth: HCI device and connection manager initialized
[ 18.607827] Bluetooth: HCI socket layer initialized
[ 18.607830] Bluetooth: L2CAP socket layer initialized
[ 18.607835] Bluetooth: SCO socket layer initialized
[ 18.970248] Bluetooth: hci0: BCM: chip id 20
[ 18.986240] Bluetooth: hci0: BCM20702A
[ 18.986244] Bluetooth: hci0: BCM (001.001.024) build 0000
[ 19.298393] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[ 19.298405] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[ 23.244565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.244568] Bluetooth: BNEP filters: protocol multicast
[ 23.244571] Bluetooth: BNEP socket layer initialized
[ 34.212446] Bluetooth: RFCOMM TTY layer initialized
[ 34.212454] Bluetooth: RFCOMM socket layer initialized
[ 34.212460] Bluetooth: RFCOMM ver 1.11
[ 2798.441902] Bluetooth: hci0 urb ffff880098178c00 failed to resubmit (2)
[ 2807.193673] Bluetooth: hci0: BCM: chip id 20
[ 2807.209666] Bluetooth: hci0: ninjago-LIFEBOOK-T731
[ 2807.209680] Bluetooth: hci0: BCM (001.001.024) build 0000
[ 2807.209719] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[ 2807.209726] Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
[ 0.144142] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 19.298393] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
[ 2807.209719] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
bluetooth 520192 39 bnep,btbcm,btrtl,btusb,rfcomm,btintel
↧

[ubuntu] Disk attached to router missing files

July 21, 2017, 2:59 pm
$
0
0
Hello. You see, I have done the following. I connected an external hard drive to my Comtrend AR-5315u router and did not see all the files and folders it contains. If I connect it to my pc with ubuntu 14.04 you will see all the folders and files. To get into the disk when connected to the router I go to Files-Connect with a server-examine-comtrend-usb1_1, and from there I can do whatever I want with the files and folders that are seen, which are not all. Also say that I entered the router and I put a password to access the disk from the browser and could only see the files and folders, in this case if that was everything. What do I have to do to see everything and do what I want when I go through Files-Connect to a server-examine-comtrend-usb1_1?
Greetings.
Thank you.

Hello. You see, I have done the
↧
Viewing all 20190 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>