I successfully Installed "ubuntu-19.10-preinstalled-server-armhf+raspi3.img", installed the updates and the Ubuntu Desktop. The wired network shows "Unmanaged" although I can use Firefox. Software won't install since there isn't a network present. I found a few suggestions on how to enable managed wired networking but the instructions are incomplete - like they were written for someone who knew how to perform the tasks outlined. Is there a patch one can download to solve the problem? If not, will one be released soon? Thanks!
↧
[ubuntu] Raspberry Pi 4B - Ubuntu 19.10 - Unmanaged Wired Network Problem
↧
[ubuntu] No jack detected in Lenovo Laptop
Hi, I've currently posted this in https://answers.launchpad.net (https://answers.launchpad.net/ubuntu/+question/685934)
But it doesn't seems to be noticed. I will copy'n'paste my post so you will not have to click it:
Hi,
I've recently bought new laptop and installed Ubuntu 19.10 on it. Internal speakers work great, but jack output isn't recognized by the system (when I plug in my headphones the sound still goes trough internal speakers, also I can only see internal speakers in "output" section of pavucontrol). I also tried Debian sid previously to this Ubuntu with same result. Jack output is running properly on dualbooted Windows 10.
Result of alsa information script:
http://alsa-project.org/db/?f=02a360...459ced8fb40784
I've tried (without luck):
1. "alsa restore"
2. mesing with /usr/share/pulseaudio/alsa-mixer/paths/ (then restored to previous configuration)
3. modifying /etc/modprobe.d/alsa-base.conf (also restored after)
If you would like any other info I will try to provide it asap.
Thanks a lot!
But it doesn't seems to be noticed. I will copy'n'paste my post so you will not have to click it:
Hi,
I've recently bought new laptop and installed Ubuntu 19.10 on it. Internal speakers work great, but jack output isn't recognized by the system (when I plug in my headphones the sound still goes trough internal speakers, also I can only see internal speakers in "output" section of pavucontrol). I also tried Debian sid previously to this Ubuntu with same result. Jack output is running properly on dualbooted Windows 10.
Result of alsa information script:
http://alsa-project.org/db/?f=02a360...459ced8fb40784
I've tried (without luck):
1. "alsa restore"
2. mesing with /usr/share/pulseaudio/alsa-mixer/paths/ (then restored to previous configuration)
3. modifying /etc/modprobe.d/alsa-base.conf (also restored after)
If you would like any other info I will try to provide it asap.
Thanks a lot!
↧
↧
USB mouse keeps disconnecting
My USB mouse keeps disconnecting every few minutes, sometimes multiple times a minute. I tried another mouse and it does the same thing. This constant disconnection and reconnection causes the mouse to stutter and lag. I'm using kubuntu 18.04.3 and I have installed all software updates. My system's CPU is a Pentium G4400. I've tried different USB ports and it still does this. Does anyone know how to fix this? This is what the system log shows:
Code:
[ 850.896437] usb 1-6: USB disconnect, device number 5
[ 851.284189] usb 1-6: new low-speed USB device number 6 using xhci_hcd
[ 851.620015] usb 1-6: device descriptor read/64, error -71
[ 851.881127] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 851.881132] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 851.881136] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 851.881138] usb 1-6: Manufacturer: Microsoft
[ 851.888706] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.0005/input/input21
[ 851.948520] hid-generic 0003:045E:0040.0005: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0
[ 924.227487] usb 1-6: USB disconnect, device number 6
[ 924.613563] usb 1-6: new low-speed USB device number 7 using xhci_hcd
[ 924.766852] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 924.766858] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 924.766861] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 924.766864] usb 1-6: Manufacturer: Microsoft
[ 924.770631] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.0006/input/input22
[ 924.772099] hid-generic 0003:045E:0040.0006: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0
[ 952.322836] usb 1-6: USB disconnect, device number 7
[ 952.696101] usb 1-6: new low-speed USB device number 8 using xhci_hcd
[ 952.849019] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 952.849024] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 952.849027] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 952.849030] usb 1-6: Manufacturer: Microsoft
[ 952.852364] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.0007/input/input23
[ 952.852828] hid-generic 0003:045E:0040.0007: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0
[ 1167.088385] usb 1-6: USB disconnect, device number 8
[ 1167.472810] usb 1-6: new low-speed USB device number 9 using xhci_hcd
[ 1167.625920] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 1167.625925] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1167.625929] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 1167.625932] usb 1-6: Manufacturer: Microsoft
[ 1167.629660] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.0008/input/input24
[ 1167.689389] hid-generic 0003:045E:0040.0008: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0
[ 1181.534359] usb 1-6: USB disconnect, device number 9
[ 1181.924206] usb 1-6: new low-speed USB device number 10 using xhci_hcd
[ 1182.076312] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 1182.076317] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1182.076320] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 1182.076323] usb 1-6: Manufacturer: Microsoft
[ 1182.080804] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.0009/input/input25
[ 1182.140510] hid-generic 0003:045E:0040.0009: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0
... snip ...
[ 3073.457826] usb 1-6: USB disconnect, device number 106
[ 3073.852405] usb 1-6: new low-speed USB device number 107 using xhci_hcd
[ 3074.000592] usb 1-6: device descriptor read/all, error -71
[ 3075.032456] usb 1-6: new low-speed USB device number 108 using xhci_hcd
[ 3075.185133] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 3075.185138] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3075.185142] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 3075.185145] usb 1-6: Manufacturer: Microsoft
[ 3075.186768] usbhid 1-6:1.0: can't add hid device: -71
[ 3075.186802] usbhid: probe of 1-6:1.0 failed with error -71
[ 3075.186979] usb 1-6: USB disconnect, device number 108
[ 3077.368393] usb usb1-port6: Cannot enable. Maybe the USB cable is bad?
[ 3078.396352] usb 1-6: new low-speed USB device number 110 using xhci_hcd
[ 3078.549370] usb 1-6: New USB device found, idVendor=045e, idProduct=0040
[ 3078.549376] usb 1-6: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3078.549379] usb 1-6: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 3078.549382] usb 1-6: Manufacturer: Microsoft
[ 3078.552647] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0040.005E/input/input110
[ 3078.613211] hid-generic 0003:045E:0040.005E: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-6/input0↧
HDA Audio C230 no headphone jack output
Hey peers,
I have the Realtek ALC668 in an Asus Rog Laptop. When inserting the Headphones the sound still comes out of the front speakers but no sound on the headphones. In Windows, when inserting the Headphones a Realtek HD Audio Manager pops up, and the sound will only be directed to the headphone jack after the user has told the prompt wether it is an headphone or loutspeakers. So i suppose this sound card needs to be switched by the OS somehow.
The sound card has also a line-out which could be used but it has a terrible high pitched noise - the switching workes in case though.
Do you have any idea how to make it work?
here is some more Info:
I have the Realtek ALC668 in an Asus Rog Laptop. When inserting the Headphones the sound still comes out of the front speakers but no sound on the headphones. In Windows, when inserting the Headphones a Realtek HD Audio Manager pops up, and the sound will only be directed to the headphone jack after the user has told the prompt wether it is an headphone or loutspeakers. So i suppose this sound card needs to be switched by the OS somehow.
The sound card has also a line-out which could be used but it has a terrible high pitched noise - the switching workes in case though.
Do you have any idea how to make it work?
here is some more Info:
Code:
cat /proc/asound/card0/codec* | grep Codec
Codec: Realtek ALC668Code:
cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xda128000 irq 141
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xdc080000 irq 17↧
Spontaneous rebooting and syslog not updating
I have a Dell XPS Studio 7100 on which I just installed Lubuntu 18.04. It has begun doing a spontaneous reboot every so often. One thing that seems to trigger it is when I am reviewing the syslog file, scrolling through it....but it doesn't do it every time then, either. I have a 430 watt power supply, one HD, 2 DVD drives, and a Radeon 300se graphics card. I switched out the CMOS, in case that was the problem, and it didn't seem to change anything.
Also, the syslog hasn't updated since 9:18a this morning, and I had the PC on for 3 hours after that (spontaneously rebooting every 20 - 30 minutes).
Not sure if these two issues are connected, but wanted to share them both in case it helps point out the issue.
I am planning to run a Mem28 test tonight and wanted to check here to see if anyone has any other ideas.
Thanks!
Also, the syslog hasn't updated since 9:18a this morning, and I had the PC on for 3 hours after that (spontaneously rebooting every 20 - 30 minutes).
Not sure if these two issues are connected, but wanted to share them both in case it helps point out the issue.
I am planning to run a Mem28 test tonight and wanted to check here to see if anyone has any other ideas.
Thanks!
↧
↧
[ubuntu] Dual-Boot Gaming Laptop Recommendation
Hi, I need to get a new laptop (from the UK) that's of a gaming spec and I ideally want to make sure I can get it dual-booting with Ubuntu. I'm well behind on hardware so I was wondering if there were any good recommendations. I'm more than capable of setting it up (I'm guessing the likelihood of getting one pre-loaded with both is zero) but I'm on the dev side of IT so I'm a bit behind on the secure boot bits that are lurking around now, and seem to be ever changing. I don't need an absolutel hardocre gaming beast, just something capable of running modern games, particularly WoW and that (in particular) has a modern graphics card that will have a good few years of life in it before it's too low spec for the games (which is what "killed" my last one). If it's too much agro to set up a proper dual-boot then I'm sure I could run Ubuntu in a VM under Windows, as the machine should be pokey enough to handle that if it's gaming spec, but I'd prefer to have it dual-booting, if it's not too much agro (I've heard that some Windows updates can nerf/reset the MBR so the boot-loader then needs re-installing?)
Cheers
Cheers
↧
[ubuntu] Samsung UR59C 4K Monitor
New Desktop PC
Motherboard - Ausu PRIME X570-P
CPU - AMD Ryzen 5 3400G
I'm now looking at Samsung UR59C 4K Monitor.
According to my finding;
Samsung UR59C 4K Monitor Specs
https://www.tomshardware.com/reviews...itor,6265.html
ASUS PRIME X570-P
https://www.asus.com/Motherboards/PR...pecifications/
Graphic
Do I need buying an additional graphic card for pairing Samsung UR59C 4K Monitor ?
Please advise. Thanks in advance.
Regards
satimis
Motherboard - Ausu PRIME X570-P
CPU - AMD Ryzen 5 3400G
I'm now looking at Samsung UR59C 4K Monitor.
According to my finding;
Samsung UR59C 4K Monitor Specs
https://www.tomshardware.com/reviews...itor,6265.html
Code:
Video Inputs 1x DisplayPort 1.2, 1x HDMI 2.0
Max Resolution & Refresh Rate 3840 x 2160 @ 60Hz, Pixel Density: 139ppihttps://www.asus.com/Motherboards/PR...pecifications/
Graphic
Code:
Integrated Graphics in the 2nd and 1st Gen AMD Ryzen with Radeon Vega Graphics Processors
VGA output support : HDMI port
- Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 24 HzPlease advise. Thanks in advance.
Regards
satimis
↧
3tb or 4tb on Ub 18.04 ?
My 2tb HD that I backup to is 90 pct full.
I'm thinking of getting a 3 or 4 tb to replace it. Are there any considerations to watch out for? For reliability, is a 3 or 4 better?
My main machine is a 4 yr old AMD desktop running under BIOS.
Thanks
I'm thinking of getting a 3 or 4 tb to replace it. Are there any considerations to watch out for? For reliability, is a 3 or 4 better?
My main machine is a 4 yr old AMD desktop running under BIOS.
Thanks
↧
Linux cannot detect SATA ssd
hello,
i have a pcb board in which there is a slot for M.2 SATA ssd. when I connect this board to linux system, it cannot detect.
however, when I type
fdisk -l it shows that /dev/sda 119 gb( sata ssd is 128 gb)
but when i type
parted -l it shows "error: /dev/sda: unrecognized disk label
model : ata lenovo ssd
disk /dev/sda: 128gb
partition table: unknown
not able to understand this issue, since I am new to linus. I am using ubuntu.
if it requires any driver to install to detect the sata ssd or need to do some setting?
please help me about this.
Thanks
i have a pcb board in which there is a slot for M.2 SATA ssd. when I connect this board to linux system, it cannot detect.
however, when I type
fdisk -l it shows that /dev/sda 119 gb( sata ssd is 128 gb)
but when i type
parted -l it shows "error: /dev/sda: unrecognized disk label
model : ata lenovo ssd
disk /dev/sda: 128gb
partition table: unknown
not able to understand this issue, since I am new to linus. I am using ubuntu.
if it requires any driver to install to detect the sata ssd or need to do some setting?
please help me about this.
Thanks
↧
↧
[ubuntu] is there Sonix webcam Kernel driver? SN9c277
Hi?
I using ubuntu linux.
is there Sonix webcam Kernel driver? module?
Where can I download Linux drivers?
Is it compatible with sn9c1xx driver?
When using a webcam on Linux, the image is often broken when screen capture.
Chip: SN9c227
thanks you..
I using ubuntu linux.
is there Sonix webcam Kernel driver? module?
Where can I download Linux drivers?
Is it compatible with sn9c1xx driver?
When using a webcam on Linux, the image is often broken when screen capture.
Chip: SN9c227
thanks you..
↧
old creative VF0050 webcam into ubuntu 18.04.3 LTS
Dear community,
We are trying to use an old webcam in a new Ubuntu 18.04.3 LTS. We haven't too much experience with this and we are not sure if it's possible.
The webcam model is: Creative Live! VF0050
The operating system detects it once it's connected through USB and the webcam led gets illuminated. But programs like Cheese and other similar we've tested, tell us there are no video devices. We guess we are not using a correct driver but we have no idea which would work or where to look at.
This is the dmesg output just immediately after connecting the webcam via USB 2.0:
Once connected, the device appears in: /dev/video0
But we get this error when we try:
This is part of the lsusb -v output:
We have installed also v4l and v4l2 packets trying to make it work:
v4l-conf
libv4l-0
v4l-utils
qv4l2
motio
ffmpeg
When trying another driver:
vlc v4l2:///dev/video0
We get the following error:
We've found some old theads in ubuntu forums about this webcam, but most of the links we've tried to follow are now unavailable.
We are not sure what else to test. Any advice is welcome!
Best regards,
iqtc
We are trying to use an old webcam in a new Ubuntu 18.04.3 LTS. We haven't too much experience with this and we are not sure if it's possible.
The webcam model is: Creative Live! VF0050
The operating system detects it once it's connected through USB and the webcam led gets illuminated. But programs like Cheese and other similar we've tested, tell us there are no video devices. We guess we are not using a correct driver but we have no idea which would work or where to look at.
This is the dmesg output just immediately after connecting the webcam via USB 2.0:
Code:
[ 1450.974242] usb 4-3: new full-speed USB device number 4 using ohci-pci
[ 1451.169336] usb 4-3: New USB device found, idVendor=041e, idProduct=4036
[ 1451.169341] usb 4-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1451.169344] usb 4-3: Product: WebCam Live!
[ 1451.169346] usb 4-3: Manufacturer: Creative Labs
[ 1451.171443] gspca_main: gspca_zc3xx-2.14.0 probing 041e:4036
[ 1452.539531] input: gspca_zc3xx as
/devices/pci0000:00/0000:00:12.0/usb4/4-3/input/input22But we get this error when we try:
Code:
cat /dev/video0
cat: /dev/video0: Invalid argumentCode:
Bus 004 Device 004: ID 041e:4036 Creative Technology, Ltd Webcam Live!/Live! Pro
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x041e Creative Technology, Ltd
idProduct 0x4036 Webcam Live!/Live! Pro
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 193
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 160mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
...v4l-conf
libv4l-0
v4l-utils
qv4l2
motio
ffmpeg
When trying another driver:
vlc v4l2:///dev/video0
We get the following error:
Code:
VLC media player 3.0.8 Vetinari (revision 3.0.8-0-gf350b6b5a7)
[00005600b343d4b0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[00005600b3518350] skins2 interface error: cannot instantiate dialogs provider
[00005600b3518350] [cli] lua interface: Listening on host "*console".
VLC media player 3.0.8 Vetinari
Command Line Interface initialized. Type `help' for help.
> libv4l2: error setting pixformat: Device or resource busy
libv4l2: error setting pixformat: Device or resource busy
libv4l2: error setting pixformat: Invalid argument
[00007fae5c0010e0] v4l2 demux error: cannot set format: Invalid argument
[00007fae5c0010e0] v4l2 demux error: not a radio tuner device
libv4l2: error setting pixformat: Device or resource busy
libv4l2: error setting pixformat: Device or resource busy
libv4l2: error setting pixformat: Invalid argument
[00007fae5c004260] v4l2 stream error: cannot set format: Invalid argument
[00007fae58000c40] main input error: Your input can't be opened
[00007fae58000c40] main input error: VLC is unable to open the MRL 'v4l2:///dev/video0'. Check the log for details.We are not sure what else to test. Any advice is welcome!
Best regards,
iqtc
↧
[ubuntu] Audio Interface (Hx stomp) recognized but no sound comes out
1)Ubuntu 18.04.3 LTS (Kernel version 5.3)
2) Audio Interface: Hx Stomp by Line 6
Just trying to play audio through my speakers (PC > Hx Stomp > Speakers). PC recognizes the device as an audio output and input but no sound comes out. Tried all newer kernel versions and several older ones, doesn't even recognize the device. Checked my speakers. The device functions properly in Windows. Would appreciate any help! Thank you very much! ):P
2) Audio Interface: Hx Stomp by Line 6
Just trying to play audio through my speakers (PC > Hx Stomp > Speakers). PC recognizes the device as an audio output and input but no sound comes out. Tried all newer kernel versions and several older ones, doesn't even recognize the device. Checked my speakers. The device functions properly in Windows. Would appreciate any help! Thank you very much! ):P
↧
Presario C700-Problem with screen
I have an old Compaq Presario C700, it was running on Windows 7 and was very slow so I decided to install Ubuntu. I installed the 32 bit version of 16.04
After installed, the screen is screwed, for example if a have a red image on a side, all that vertical line above it turns into the same color. I can barely see whats under the line. It happens since the first moment I turn on the pc and shows the Compaq logo.
After installed, the screen is screwed, for example if a have a red image on a side, all that vertical line above it turns into the same color. I can barely see whats under the line. It happens since the first moment I turn on the pc and shows the Compaq logo.
↧
↧
ASrock E3C246D4U ad Ubuntu 18.04 LTS
Does anyone have any experiences (negative, positive, or otherwise) to share about installing and running Ubuntu on an ASrock E3C246D4U motherboard? I have an opportunity to pick up one of these boards with a xeon e-2288g at a very good price and would like to use it for my homelab but cannot seem to find any discussion online as to how well it plays with Linux.
↧
Missing a module in Brother Scanner Setup
Hello him610,
I am experiencing similar problems as the original author of this thread. May I ask you for help?
I have installed a fresh Lubuntu 19.10 Eoan Ermine (Lubuntu!) from a DVD and want to get my brother scanner running. (On Lubuntu 16.10 LTS it worked fine).
Then I did the following steps:
As the directory did not exist:
Executed the "Driver Install Tool" from Brother (downloaded from here: https://support.brother.com/g/b/down...&flang=English)
So this worked fine except from the following that Lubuntu complains: (as I dont know if you understand german, I translated it to english)
package ia32-libs is not available, but is referenced from another package. This can mean , that the package is missing or is superseded or is only available from another source. But the following package is replacing it:
lib32z
Restarted the PC.
Made me a participant in the scanner group: (where seb is my username)
Edit config file: (whereas I add these two lines right above that line: LABEL="libsane_rules_end".)
The printer is working fine now, but the scanner not. Simple-scan reports: Additional software needed. You need to install driver software for your scanner.
What to do?
I am experiencing similar problems as the original author of this thread. May I ask you for help?
I have installed a fresh Lubuntu 19.10 Eoan Ermine (Lubuntu!) from a DVD and want to get my brother scanner running. (On Lubuntu 16.10 LTS it worked fine).
Then I did the following steps:
As the directory did not exist:
Code:
~$ sudo mkdir /var/spool/lpdCode:
~$
Input model name ->MFC-9180
You are going to install following packages.
mfc9180lpr-1.1.2-1.i386.deb
cupswrapperMFC9180-1.0.2-1.i386.deb
brscan-0.2.4-0.amd64.deb
brscan-skey-0.2.4-1.amd64.deb
OK? [y/N] ->y
OK:1 http://de.archive.ubuntu.com/ubuntu eoan InRelease
OK:2 http://de.archive.ubuntu.com/ubuntu eoan-updates InRelease
OK:3 http://de.archive.ubuntu.com/ubuntu eoan-backports InRelease
OK:4 http://security.ubuntu.com/ubuntu eoan-security InRelease
Paketlisten werden gelesen... Fertig
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paket ia32-libs ist nicht verfügbar, wird aber von einem anderen Paket
referenziert. Das kann heißen, dass das Paket fehlt, dass es abgelöst
wurde oder nur aus einer anderen Quelle verfügbar ist.
Doch die folgenden Pakete ersetzen es:
lib32z1
E: Für Paket »ia32-libs« existiert kein Installationskandidat.
dpkg -x mfc9180lpr-1.1.2-1.i386.deb /
dpkg -x cupswrapperMFC9180-1.0.2-1.i386.deb /
dpkg-deb: Paket »mfc9180lpr« wird in »mfc9180lpr-1.1.2-1a.i386.deb« gebaut.
dpkg -b ./brother_driver_packdir mfc9180lpr-1.1.2-1a.i386.deb
dpkg-deb: Paket »cupswrappermfc9180« wird in »cupswrapperMFC9180-1.0.2-1a.i386.deb« gebaut.
dpkg -b ./brother_driver_packdir cupswrapperMFC9180-1.0.2-1a.i386.deb
dpkg -i --force-all mfc9180lpr-1.1.2-1a.i386.deb
dpkg: Warnung: Problem wird übergangen, weil --force angegeben ist:
dpkg: Warnung: Paket-Architektur (i386) passt nicht zum System (amd64)
(Lese Datenbank ... 265607 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von mfc9180lpr-1.1.2-1a.i386.deb ...
Entpacken von mfc9180lpr:i386 (1.1.2-1) über (1.1.2-1) ...
mfc9180lpr:i386 (1.1.2-1) wird eingerichtet ...
dpkg -i --force-all cupswrapperMFC9180-1.0.2-1a.i386.deb
dpkg: Warnung: Problem wird übergangen, weil --force angegeben ist:
dpkg: Warnung: Paket-Architektur (i386) passt nicht zum System (amd64)
(Lese Datenbank ... 265607 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von cupswrapperMFC9180-1.0.2-1a.i386.deb ...
Restarting cups (via systemctl): cups.service.
Entpacken von cupswrappermfc9180:i386 (1.0.2-1) über (1.0.2-1) ...
cupswrappermfc9180:i386 (1.0.2-1) wird eingerichtet ...
rm -f /usr/lib/cups/filter/brlpdwrapperMFC9180
Restarting cups (via systemctl): cups.service.
#
Will you specify the Device URI? [Y/n] ->n
Test Print? [y/N] ->y
wait 5s.
lpr -P MFC9180 /usr/share/cups/data/testprint
You are going to install following packages.
brscan-0.2.4-0.amd64.deb
dpkg -i --force-all brscan-0.2.4-0.amd64.deb
(Lese Datenbank ... 265607 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von brscan-0.2.4-0.amd64.deb ...
Entpacken von brscan (0.2.4) über (0.2.4) ...
brscan (0.2.4) wird eingerichtet ...
You are going to install following packages.
brscan-skey-0.2.4-1.amd64.deb
dpkg -i --force-all brscan-skey-0.2.4-1.amd64.deb
(Lese Datenbank ... 265607 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von brscan-skey-0.2.4-1.amd64.deb ...
Entpacken von brscan-skey (0.2.4-1) über (0.2.4-1) ...
brscan-skey (0.2.4-1) wird eingerichtet ...package ia32-libs is not available, but is referenced from another package. This can mean , that the package is missing or is superseded or is only available from another source. But the following package is replacing it:
lib32z
Restarted the PC.
Made me a participant in the scanner group: (where seb is my username)
Code:
~$ sudo usermod -a -G scanner sebCode:
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"The printer is working fine now, but the scanner not. Simple-scan reports: Additional software needed. You need to install driver software for your scanner.
What to do?
↧
Asus UX431FA- only works with nomodeset
Hello,
I had tried with lots of help to get a version of Ubuntu running on my laptop, the non-dedicated graphics version of the Asus Zenbook UX431FA.
All youtube videos or forum posts conclude that either try this grub edit, or just update bios the end all be all solution that always works.
No other grub edit works besides nomodeset, and I did update my bios but it still fails. Nomodeset causes the laptop to be unusable (long boot, external display not supported, no brightness control, laptop doesnt sleep, p much 0 display controls).
Has anyone else used this specific model to any avail, or have other suggestions?
I had tried with lots of help to get a version of Ubuntu running on my laptop, the non-dedicated graphics version of the Asus Zenbook UX431FA.
All youtube videos or forum posts conclude that either try this grub edit, or just update bios the end all be all solution that always works.
No other grub edit works besides nomodeset, and I did update my bios but it still fails. Nomodeset causes the laptop to be unusable (long boot, external display not supported, no brightness control, laptop doesnt sleep, p much 0 display controls).
Has anyone else used this specific model to any avail, or have other suggestions?
↧
Horizontal lines sometimes flash onscreen Intel UHD 620
Hello, I have had this issue intermittently for a while, but held off on asking about it because I was trying to figure out what triggers it to no success. Periodically, horizontal, usually white, lines flash on the screen and disappear just as quickly. I cannot figure out what in the world triggers it, but it seems more likely to start happening when I have been using my computer for a while. Interestingly, it does not seem to occur on a second monitor when I connect my laptop to it via an HDMI cable. I had a previous display issue I posted about here that was resolved, but might be related: https://ubuntuforums.org/showthread.php?t=2429810 Even back before I resolved this previous issue, the horizontal lines flashing onscreen occurred. In addition, the problem existed on both 19.04 and 19.10 when I upgraded.
Here are the results for
Output:
I'm willing to try various suggestions out to resolve this, but keep in mind I will have to try each suggestion out for a while to make sure the issue is resolved since the problem is intermittent.
Here are the results for
Code:
lspciCode:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point LPC Controller/eSPI Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
02:00.0 Non-Volatile memory controller: Phison Electronics Corporation E12 NVMe Controller (rev 01)↧
↧
Graphic support
Hello everyone can anyone tell me which graphic cards are best supported for Linux / Ubuntu
Brand names as well.. I got a machine from my son and it has a Vapor X graphics card in it but I seem to have issues using it with a new monitor
This is my graphic card info
is this graphic card suitable for Ubuntu? it was working just fine but when i use this new monitor I have issues like screen tearing
Thanks so much
Brand names as well.. I got a machine from my son and it has a Vapor X graphics card in it but I seem to have issues using it with a new monitor
This is my graphic card info
Code:
lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]Thanks so much
↧
[ubuntu] Ubuntu 19.10 on Lenovo Miix 520 Touchscreen Not Working
Tried:
xinput --list
xsetwacom --list devices
No sign of the touchscreen.
Screenshot: https://photos.app.goo.gl/6YZk841RQdyfAXvn9
I've done my research & tried reinstalling a fresh OS many times, no fruit.
I love Ubuntu & the touch interface, would like to see them working together again. Please help me bring my touchscreen back to life! Thank you so much in advance!
xinput --list
xsetwacom --list devices
No sign of the touchscreen.
Screenshot: https://photos.app.goo.gl/6YZk841RQdyfAXvn9
I've done my research & tried reinstalling a fresh OS many times, no fruit.
I love Ubuntu & the touch interface, would like to see them working together again. Please help me bring my touchscreen back to life! Thank you so much in advance!
↧
[SOLVED] New Brother Laser printer won't work with Opera 64 Browser
Have Opera Version:64.0.3417.92, Opera is up to date.
Got a new Brother laser printer HL-L 2390DW.
Installed it with Windows 10 and it runs fine.
Installed Brother printer on my desktop running Ubuntu 18.04.3 LTS and it runs, scans, copies fine using Firefox, Chrome and Vivaldi browsers but can't get it to work with Opera Version:64.0.3417.92.
Help.
What needs to be done to get this Brother laser printer working with Opera 64?
Got a new Brother laser printer HL-L 2390DW.
Installed it with Windows 10 and it runs fine.
Installed Brother printer on my desktop running Ubuntu 18.04.3 LTS and it runs, scans, copies fine using Firefox, Chrome and Vivaldi browsers but can't get it to work with Opera Version:64.0.3417.92.
Help.
What needs to be done to get this Brother laser printer working with Opera 64?
↧